Drivers urged to drive with bowl of water in car | Tech News

Motorists have been urged to drive with a bowl of water on their car seat in a dramatic bid to save on fuel prices. Experts have pressured holding a bowl of water in the passenger seat will sluggish drivers down, making them drive more rigorously and subsequently save fuel. 

Petrol and diesel autos have a tendency to use up more fuel when accelerating and braking sharply, however this could typically be laborious to choose. A bowl of water inside the car will likely be a visible identifier of how aggressively drivers are travelling and may encourage motorists to take it simple. This may repay, with fuel use doubtless to drop significantly, saving drivers essential money when filling up their autos. 

Experts at ChooseMyCar.com have been amongst these calling for motorists to think about the straightforward tip. 

They defined: “Keeping an open bowl of water on your passenger seat is a great deterrent for unnecessary acceleration and braking.

“If you hit the accelerator too laborious, you may see water pour out the edges; likewise, when you’re driving too fast and braking laborious you may discover water on the seat. The best bowls to use for this are small cereal bowls, with water about an inch from the highest.”

Previous research has revealed drivers can save considerable amounts of fuel by slowing down even a fraction. 

Data from the AA has revealed that travelling at 80mph can use up to 25% more fuel than at 70mph. 

Meanwhile, 70mph will tend to use up to 9% more fuel than those driving at 60mph. This will then use up 15% more fuel than vehicles that are travelling at 50mph.

Slowing down doesn’t only bring benefits for the fuel tank with motorists also likely to become safer drivers. Travelling at slower speeds means individuals will have plenty of time to react to potential hazards and avoid serious collisions.

Vanarama explained: “Every time you apply the brakes, the energy that you’ve paid for in fuel is lost in heat generated by the brake pads and discs. 

“Don’t rev the engine unnecessarily when accelerating, simply transfer gently via the gears, holding the engine velocity to a affordable stage, however with out labouring it by being in too high a gear.”